cmm horizontal | swan si
Horizontal arm measuring system with longitudinal x guide attached to the floor ("runway" structure)
CMM horizontal | swan si
The SWAN SI range offers a technologically advanced and cost-optimized solution for dimensional inspection of thin-walled metal sheet or plastic components typically used in the automotive industry.
SWAN SI CMMs are equipped with air bearings on both the Y-axis and the Z-axis, which ensure excellent results and high accuracy. The X-axis guide is located on the side of the cast iron or granite base plate.
The light and robust carriage, built entirely of light alloy, as well as the dual mechanical guide-way on the X beam, provide reliability, precision and rapid measurements.
When used in manufacturing environments, the SWAN SI machine may be installed on a pneumatic vibration isolation system without requiring specially constructed foundations.
swan yes
General features
Features and benefits
- Measuring system with optical linear transducers
- Motion control thanks to DC servomotors
- Air bearing guides on Y and Z axes, precision guide on X-axis
- Mechanical head balancing with safety brake
Environment
- Temperatures: (20 ± 2) °C
- Temperature gradient: 1 °C/hour - 2 °C/day - 0.5 °C/m
- Acceptable vibrations:
30 mm/sec2 between 1 and 10 Hz 15 mm/sec2 between 10 and 20 Hz 50 mm/sec2 between 20 and 100 Hz
Supplies
- Minimum air supply: 0.55 MPa
- Air consumption: 90 Nl/min (14 l/min at 0.55 MPa)
- Power supply voltage: 230 V 50 Hz
- Maximum power consumption: 10 A 1400 W
Performance data
All COORD3 CMM products are factory-tested for accuracy according to the UNI EN ISO 10360 - 2 standard
Options
- Cast iron or granite surface plate
- Models and sizes
COORD3 SWAN SI CMMs are available with the following measuring strokes (Y.Z mm):
10.12 /10.15/10.18 /10.20
12.15 /12.18 /12.20
15.15 /15.18 /15.20
request a visit from one of our agents
measuring machines
coord3
Since 1973 we have been designing, building and distributing coordinate measuring machines (CMMs) and innovative solutions for dimensional control, surface reconstruction and reverse engineering.
COORD3 measuring machines and software are used by small, medium and large companies all over the world to certify and improve the quality of their products. COORD3 boasts a range of measuring machines that includes over 35 automatic and manual models, from cost-effective countertop CMMs for the inspection of small parts to some of the largest Gantry CMMs ever produced.
COORD CMMs are on active duty in the aerospace, defense and heavy industry sectors and make us proud, every day, of our work.
Strada Statale 25, No. 3 - 10050 - Bruzolo (TO) - Italy
PHONE
+39 011 963 5511
TECHNICAL ASSISTANCE
service@coord3.com
COMMERCIAL SUPPORT
info@coord3.com
ADMINISTRATION
finance@coord3.com
PURCHASING OFFICE
acquisti@coord3.com