cmm horizontal | swan l

Horizontal arm measuring system with longitudinal x guide attached to the side of the surface plate (“console” structure)

CMM horizontal | swan l

SWAN L CMMs feature a horizontal arm installed on guides (tracks) and may be installed flush with the floor of the plant.

Its walkable covers allow operators to control large and heavy parts, which may be placed on a separate floor, on a system installed on the ground or on an automated system.

Their “Console” structure with integral support plate is extremely modular and easy to configure, and thus combines the flexibility and programmability of measuring machines with the speed and intuitive use of traditional measurement gauges.

swan l

General features
Features and benefits
  • Measuring system with optical linear transducers
  • Motion control thanks to DC servomotors
  • Air bearing guideways on all axes
  • Mechanical head balancing with safety brake
Environment
  • Temperature: (20 ± 2) °C
  • Temperature gradient:: 1 °C/hour – 2 °C/day – 0,5 °C/m
  • Acceptable vibrations:/strong>
    30 mm/sec2 tra 1 e 10 Hz
    15 mm/sec2 tra 10 e 20 Hz
    50 mm/sec2 tra 20 e 100 Hz
Supplies
  • Minimum air supply: 0.55 MPa
  • Air consumption: 100 Nl/min (17 l/min at 0.55 MPa)
  • Power supply voltage: 230 V 50 Hz
  • Maximum power consumption: 10 A 1400 W
Performance data

All COORD3 CMM products are factory-tested for accuracy according to the UNI EN ISO 10360 – 2 standard

Options
  • Cast iron surface plate
  • Linear thermal compensation
  • COORD3 SWAN L CMMs are available with the following measuring strokes (Y.Z mm):
    12.15 / 12.18 / 12.20
    15.15 / 15.18 / 15.20
request a visit from one of our agents
We care about your data! Find out how we treat them in our privacy policy
measuring machines
coord3
Since 1973 we have been designing, building and distributing coordinate measuring machines (CMMs) and innovative solutions for dimensional control, surface reconstruction and reverse engineering.
COORD3 measuring machines and software are used by small, medium and large companies all over the world to certify and improve the quality of their products. COORD3 boasts a range of measuring machines that includes over 35 automatic and manual models, from cost-effective countertop CMMs for the inspection of small parts to some of the largest Gantry CMMs ever produced.
COORD CMMs are on active duty in the aerospace, defense and heavy industry sectors and make us proud, every day, of our work.
coord3

Strada statale 25, 3 10050 Bruzolo (To)

+390119635511

Perceptron North America
47827 Halyard Drive Plymouth, MI 48170 – U.S.A. Tel: +1 734 414 6100 [email protected]
Perceptron China

Perceptron Trading (Shanghai) Co., Ltd
Room 1005, Building 22
No.368 Zhangjiang Road, Pilot Free Trade Zone
Shanghai 201203 – China
Tel: +86 21 3393-2262
[email protected]

Perceptron Asia
Perceptron Non-Contact Metrology Solutions Pvt Ltd
No. 461-A, Shakti Khand – 4,
Indirapuram, Ghaziabad – 201014, India.
Phone: +91 120 4169746
Perceptron United Kingdom

Perceptron Metrology UK Ltd.
Fort Dunlop, Fort Parkway
Birmingham B24 9FE, UK
Tel: +44 121 6297794
[email protected]

Perceptron EMEA

Wamslerstraße, 2-4
D-81829 Munchen
Germany
Tel: + 49 89 960 980
[email protected]

  • coord3

    Strada statale 25, 3 10050 Bruzolo (To)

    +390119635511

  • Perceptron North America
    47827 Halyard Drive Plymouth, MI 48170 – U.S.A. Tel: +1 734 414 6100 [email protected]
  • Perceptron China

    Perceptron Trading (Shanghai) Co., Ltd
    Room 1005, Building 22
    No.368 Zhangjiang Road, Pilot Free Trade Zone
    Shanghai 201203 – China
    Tel: +86 21 3393-2262
    [email protected]

  • Perceptron Asia
    Perceptron Non-Contact Metrology Solutions Pvt Ltd
    No. 461-A, Shakti Khand – 4,
    Indirapuram, Ghaziabad – 201014, India.
    Phone: +91 120 4169746
  • Perceptron United Kingdom

    Perceptron Metrology UK Ltd.
    Fort Dunlop, Fort Parkway
    Birmingham B24 9FE, UK
    Tel: +44 121 6297794
    [email protected]

  • Perceptron EMEA

    Wamslerstraße, 2-4
    D-81829 Munchen
    Germany
    Tel: + 49 89 960 980
    [email protected]

Strada Statale 25, n°3 – 10050 – Bruzolo (To) – Italy

TECHNICAL ASSISTANCE
[email protected] 

COMMERCIAL SUPPORT
[email protected] 

ADMINISTRATION
[email protected]

PURCHASING OFFICE
[email protected] 

© 2021 COORD 3 S.R.L. | Strada Statale 25, n°3 – 10050 Bruzolo (To) - Italy | REA C.C.I.A.A. N. 1201305 Torino - Capitale sociale versato: Euro 50.000,00 | P.IVA\C.F: 11287420019 | SDI C1QQYZR | ISO 9001 Certified | Privacy Policy  | Cookie Policy
Powered by BECAUSE web design marketing & SEO