cmm horizontal | swan l
Horizontal arm measuring system with longitudinal x guide attached to the side of the surface plate (“console” structure)
CMM horizontal | swan l
SWAN L CMMs feature a horizontal arm installed on guides (tracks) and may be installed flush with the floor of the plant.
Its walkable covers allow operators to control large and heavy parts, which may be placed on a separate floor, on a system installed on the ground or on an automated system.
Their “Console” structure with integral support plate is extremely modular and easy to configure, and thus combines the flexibility and programmability of measuring machines with the speed and intuitive use of traditional measurement gauges.
swan l
General features
Features and benefits
- Measuring system with optical linear transducers
- Motion control thanks to DC servomotors
- Air bearing guideways on all axes
- Mechanical head balancing with safety brake
Environment
- Temperature: (20 ± 2) °C
- Temperature gradient:: 1 °C/hour – 2 °C/day – 0,5 °C/m
- Acceptable vibrations:/strong>
30 mm/sec2 tra 1 e 10 Hz
15 mm/sec2 tra 10 e 20 Hz
50 mm/sec2 tra 20 e 100 Hz
Supplies
- Minimum air supply: 0.55 MPa
- Air consumption: 100 Nl/min (17 l/min at 0.55 MPa)
- Power supply voltage: 230 V 50 Hz
- Maximum power consumption: 10 A 1400 W
Performance data
All COORD3 CMM products are factory-tested for accuracy according to the UNI EN ISO 10360 – 2 standard
Options
- Cast iron surface plate
- Linear thermal compensation
- COORD3 SWAN L CMMs are available with the following measuring strokes (Y.Z mm):
12.15 / 12.18 / 12.20
15.15 / 15.18 / 15.20
request a visit from one of our agents
measuring machines
coord3
Since 1973 we have been designing, building and distributing coordinate measuring machines (CMMs) and innovative solutions for dimensional control, surface reconstruction and reverse engineering.
COORD3 measuring machines and software are used by small, medium and large companies all over the world to certify and improve the quality of their products. COORD3 boasts a range of measuring machines that includes over 35 automatic and manual models, from cost-effective countertop CMMs for the inspection of small parts to some of the largest Gantry CMMs ever produced.
COORD CMMs are on active duty in the aerospace, defense and heavy industry sectors and make us proud, every day, of our work.
Strada Statale 25, n°3 – 10050 – Bruzolo (To) – Italy
PHONE
+39 011 963 5511
TECHNICAL ASSISTANCE
service@coord3.com
COMMERCIAL SUPPORT
info@coord3.com
ADMINISTRATION
finance@coord3.com
PURCHASING OFFICE
acquisti@coord3.com