cmm horizontal | jupiter

Horizontal arm measuring system with Longitudinal x guide attached to the floor (“runway” structure) with mobile arm Equipped with fairing

FIND OUT MORE

CMM horizontal | jupiter

JUPITER CMMs are reliable, high-performance machines designed for direct use in production areas and developed specifically for body and subassembly inspection applications.

JUPITER CMMs are mounted on tracks and available both in single and dual arm versions. They are totally encapsulated to guarantee thermal insulation, and feature a system that prevents contamination from the workshop floor.

Their open built-in structure, the walkable covers that protect the X guideways and the fairing that protects the entire structure ensure maximum accessibility to the measuring area and simplify part loading and unloading operations, in addition to being designed for direct use in production areas.

These CMMs, which may be installed with Flush-floor level equipped with walkable covers as a standard feature, stand out for their high dynamics and metrology performances.

The air bearings mounted on both the Y-axis and the Z-axis are the key element of this high-performance measurement solution. In the dual arm configuration, the measurement volumes of the two horizontal arms overlap by 100 mm in order to allow for measurements the entire structure.

CMM jupiter

General features

Features and benefits

Measuring system with optical linear transducers
Motion control thanks to DC servomotors
Air bearing guides on Y and Z axes, recirculating ball bearings on X-axis
Mechanical head balancing with safety brake

Environment

Temperature: (20 ± 2) °C
Temperature gradient: 1 °C/hour – 2 °C/day – 0,5 °C/m
Acceptable vibrations:
30 mm/sec² tra 1 e 10 Hz
15 mm/sec² tra 10 e 20 Hz
50 mm/sec² tra 20 e 100 Hz

Supplies

Minimum air supply: 0.55 MPa
Air consumption: 150 Nl/min (23 l/min at 0.55 MPa)
Power supply voltage: 230 V 50 Hz
Maximum power consumption: 10 A 1400 W

Performance data

All COORD3 CMM products are factory-tested for accuracy according to the UNI EN ISO 10360 – 2 standard

Options

Cast iron or granite surface plate
Linear thermal compensation
Models and sizes
Le COORD3 JUPITER CMMs are available with the following measuring strokes (Y.Z mm):
14.20 / 14.25 / 14.30
16.20 / 16.25 / 16.30

request a visit from one of our agents

Name *

Email *

Phone *

Company *

Company headquarters

Can we send you other communications relating to news, promotions and trade fairs?

Yes, send me other communications

Do you agree to the processing of your data? *

I consent to the processing of my personal data pursuant to the GDPR

We care about your data! Find out how we treat them in our privacy policy

measuring machines

coord3

Since 1973 we have been designing, building and distributing coordinate measuring machines (CMMs) and innovative solutions for dimensional control, surface reconstruction and reverse engineering.

COORD3 measuring machines and software are used by small, medium and large companies all over the world to certify and improve the quality of their products. COORD3 boasts a range of measuring machines that includes over 35 automatic and manual models, from cost-effective countertop CMMs for the inspection of small parts to some of the largest Gantry CMMs ever produced.

COORD CMMs are on active duty in the aerospace, defense and heavy industry sectors and make us proud, every day, of our work.

Strada Statale 25, n°3 – 10050 – Bruzolo (To) – Italy

PHONE
+39 011 963 5511

TECHNICAL ASSISTANCE
service@coord3.com

COMMERCIAL SUPPORT
info@coord3.com

ADMINISTRATION
finance@coord3.com

PURCHASING OFFICE
acquisti@coord3.com