cmm BRIDGE |
u-control

economic and compact cmm thanks to the integrated high-performance control for high precision testing of small and medium parts.
cmm u-control

Integrated control with adjustable arm monitor and keyboard support

particolare benchmark 3

Unique half-gantry design for greater rigidity and lower inertial mass

  • Integrated control with adjustable arm monitor and keyboard support

  • particolare benchmark 3

    Unique half-gantry design for greater rigidity and lower inertial mass

CMM bridge | u-control

The open structure of the U-CONTROL solution offers an outstanding ergonomic design. Thanks to its compact size, it is perfect for quality control rooms or production environments.

The fully equipped U-CONTROL solution with air bearings ensures an accuracy of 2.5 microns. The standard version is equipped with a Renishaw touch-probe and can be supplied with a motorized probe head for fully automated inspection applications.

The U-CONTROL CMM is particularly suitable for small workshops.

CMM u-control

General features
The U-CONTROL CMM has a measuring volume of 600mm x 500mm x 500mm
features and benefits
  • Ultra-rigid platform in advanced alloy
  • Rapid thermal diffusion through advanced alloy CMM frame when temperatures change
  • FEA design provides optimum moment of inertia and stiffness, allowing high accelerations
  • One-piece granite base plate with M8 threaded table inserts with wide grid pattern
  • Rigid air bearings
  • Pneumatic Z-axis counterbalance
  • 0.1-micron resolution measuring scales with dynamic signal processing
  • Quick and easy installation with pre-assembled monobloc shipping
  • Overall dimensions optimized due to an integrated control
  • Zero hysteresis friction drives to all axes
  • Passive vibration damping system to isolate external vibrations
  • Free access to the CMM measuring area
  • Maximum positioning speed: 500 mm/sec
  • Maximum acceleration: 1500 mm/sec2
environment
  • Nominal temperature: 20 °C
  • Metrological temperature range: 18 – 22 °C (Extended range: 16 – 26 °C)
  • Temperature gradient: 0.5 °C/hour – 2 °C/day (Extended range: 5 °C/day)
  • Operating temperature range: 15 -35 °C
  • Relative humidity: 40 – 80% (non-condensing)
  • Acceptable vibrations: 30 mm/sec2 1-10 Hz | 15mm/sec2 10-20 Hz | 50 mm/sec2 20-100 Hz
supplies
  • Minimum air supply: 5 bar (72 PSI)
  • Air consumption: 90 NL/min (3 cfm)
  • Power supply voltage: 230 V 50 Hz or 110 V 60 Hz
  • Maximum power consumption: 10 A, 1200 W
performance data

All COORD3 CMM products are factory-tested for accuracy according to the UNI EN ISO 10360 – 2 standard.

Performance data are only valid if the following specifications are met:

  • PH10T/M/PH20-TP20/TP200: Tip diameter Ø 4 mm x Stylus length 10 mm
  • MH20i-TP20: Tip diameter Ø 4 mm x Stylus length 10 mm
  • L = measuring length in mm
  • Ambient temperature Range: T: 18 ÷ 22 °C;

    Max. Gradients: 0,5 °K/h – 2,0 °K/24h – 0,5 °K/m

    (1) Maximum Permissible Error according UNI EN ISO 10360-2:2010

    (2) Maximum Permissible Limit according UNI EN ISO 10360-2:2010

options
  • Optional CMM touch station for enhanced ergonomics
  • Dynamic thermal compensation of machine and part
  • Pneumatic vibration isolation system
  • Air dryer
  • Modular part fixture kits
request a visit from one of our agents
We care about your data! Find out how we treat them in our privacy policy
measuring machines
coord3
Since 1973 we have been designing, building and distributing coordinate measuring machines (CMMs) and innovative solutions for dimensional control, surface reconstruction and reverse engineering.
COORD3 measuring machines and software are used by small, medium and large companies all over the world to certify and improve the quality of their products. COORD3 boasts a range of measuring machines that includes over 35 automatic and manual models, from cost-effective countertop CMMs for the inspection of small parts to some of the largest Gantry CMMs ever produced.
COORD CMMs are on active duty in the aerospace, defense and heavy industry sectors and make us proud, every day, of our work.
coord3

Strada statale 25, 3 10050 Bruzolo (To)

+390119635511

Perceptron North America
47827 Halyard Drive Plymouth, MI 48170 – U.S.A. Tel: +1 734 414 6100 [email protected]
Perceptron China

Perceptron Trading (Shanghai) Co., Ltd
Room 1005, Building 22
No.368 Zhangjiang Road, Pilot Free Trade Zone
Shanghai 201203 – China
Tel: +86 21 3393-2262
[email protected]

Perceptron Asia
Perceptron Non-Contact Metrology Solutions Pvt Ltd
No. 461-A, Shakti Khand – 4,
Indirapuram, Ghaziabad – 201014, India.
Phone: +91 120 4169746
Perceptron United Kingdom

Perceptron Metrology UK Ltd.
Fort Dunlop, Fort Parkway
Birmingham B24 9FE, UK
Tel: +44 121 6297794
[email protected]

Perceptron EMEA

Wamslerstraße, 2-4
D-81829 Munchen
Germany
Tel: + 49 89 960 980
[email protected]

  • coord3

    Strada statale 25, 3 10050 Bruzolo (To)

    +390119635511

  • Perceptron North America
    47827 Halyard Drive Plymouth, MI 48170 – U.S.A. Tel: +1 734 414 6100 [email protected]
  • Perceptron China

    Perceptron Trading (Shanghai) Co., Ltd
    Room 1005, Building 22
    No.368 Zhangjiang Road, Pilot Free Trade Zone
    Shanghai 201203 – China
    Tel: +86 21 3393-2262
    [email protected]

  • Perceptron Asia
    Perceptron Non-Contact Metrology Solutions Pvt Ltd
    No. 461-A, Shakti Khand – 4,
    Indirapuram, Ghaziabad – 201014, India.
    Phone: +91 120 4169746
  • Perceptron United Kingdom

    Perceptron Metrology UK Ltd.
    Fort Dunlop, Fort Parkway
    Birmingham B24 9FE, UK
    Tel: +44 121 6297794
    [email protected]

  • Perceptron EMEA

    Wamslerstraße, 2-4
    D-81829 Munchen
    Germany
    Tel: + 49 89 960 980
    [email protected]

Strada Statale 25, n°3 – 10050 – Bruzolo (To) – Italy

TECHNICAL ASSISTANCE
[email protected] 

COMMERCIAL SUPPORT
[email protected] 

ADMINISTRATION
[email protected]

PURCHASING OFFICE
[email protected] 

© 2021 COORD 3 S.R.L. | Strada Statale 25, n°3 – 10050 Bruzolo (To) - Italy | REA C.C.I.A.A. N. 1201305 Torino - Capitale sociale versato: Euro 50.000,00 | P.IVA\C.F: 11287420019 | SDI C1QQYZR | ISO 9001 Certified | Privacy Policy  | Cookie Policy
Powered by BECAUSE web design marketing & SEO