cmm gantry | mct starlight

Medium-large column cmm – an all-rounder that ensures an excellent structural rigidity.

CMM gantry | mct starlight

MCT SL is a range of medium-to-large Gantry CMMs that stand out for their excellent structural stability and flexibility.

These solutions may be tailored to any measuring requirements and are available in many different sizes.

MCT STARLIGHT is also available in the NT LIGHT configuration, which features a Z ram in light aluminium alloy and a “Single Read” system on the X-axis.

mct starlight

General features
Features and benefits
  • Generous distance between bearings for optimum mechanical rigidity
  • Main Y carriage with high rigidity and exclusive tubular steel structure
  • Z ram in extruded aluminium alloy to guarantee rigidity and minimize inertia
  • X beams with large transversal section in stabilised steel, equipped with a support system to allow for linear expansion without risking distortion
  • Ground X/Y axes guide-ways in high-resistance epoxy resin (roughness 0.4 mm)
  • Measuring system with high-resolution linear transducers (0.1 μm) with “Dual Readersystem on the longitudinal Xaxis
  • Dual Drivesystem on main X carriage (optional, standard for stroke Y=3000)
  • Automatic, multi-sensor system for compensating errors due to the thermal elongation of structural elements
Environment

Temperature range for metrological specification:

  • Ambient temperature: 18 ÷ 22 °C
  • Maximum hourly gradient: 1.0 °K/h
  • Maximum daily gradient: 2.0 °K/24h
  • Maximum volume gradient: 0.5 °K/m (SL NT) – 1.0 °K (SL)
  • Operating temperature: 15 ÷ 35 °C
  • Operating relative humidity: 40 ÷ 80% (non-condensing)
  • Allowed vibrations:
    (acceleration between peaks)
    30 mm/sec 2 from 1 to 10 Hz
    15 mm/sec 2 from 10 to 20 Hz
    50 mm/sec 2 from 20 to 100 Hz
Supplies
  • Minimum air supply: 6 bar
  • Air consumption: max. 300 Nl/min
  • Power supply voltage: 230 V ± 10% | 50 Hz ± 2% (singlephase) 115 V ± 10% | 60 Hz ± 2% (single-phase)
Probes and measuring heads
  • Manual probe heads: MIH, MH20, MH20i
  • Motorised probe heads: PH10M, PH10MQ
  • Motorised indexable probe heads: PH20, REVO
  • Point to point trigger probes: TP2, TP20, TP200
  • Analogue contact probes: SP600, SP25M, SP80
  • Stylus and probe changers: Fully automatic changing stations
Performance data

All Coord3 CMM products are factory-tested for accuracy according to the UNI EN ISO 10360 – 2 standard

The services indicated are valid under the following conditions:
– TP2/TP20-5W/TP200:  Ø4mm x stylus length 10mm
– SP25: SM1, stylus length 50mm Ø5mm 
– REVO: RSP2/RSH175 – RSP3-1/SH25-1, stylus length 20mm

– SP80:  Ø 5mm  stylus length 50mm
– L= measuring length in mm
– Ambient temperature conditions:
T : 18÷22 °C; Degrees max: 1,0 °C/h – 2,0 °C/24h – 1,0 °C/m

[1] Maximum Permissible Error on length measurements according to ISO 10360-2
[2] Maximum permissible point gripping error according to ISO 10360-2
[3] Maximum permissible error of scanning point gripping according to ISO 10360-4 standard for SP25M / SP80 / REVO probes 

 

MCT STARLIGHT NT

The services indicated are valid under the following conditions:
– TP2/TP20-5W/TP200:  Ø4mm x stylus length 10mm
– SP25: SM1, stylus length 50mm Ø5mm 
– REVO: RSP2/RSH175 – RSP3-1/SH25-1, stylus length 20mm

– SP80: SM1, Ø 5mm  stylus length 50mm
– L= measuring length in mm
– Ambient temperature conditions: 
T : 18÷22 °C; Degrees max: 1,0 °C/h – 2,0 °C/24h – 0,5 °C/m

[1] Maximum Permissible Error on length measurements according to ISO 10360-2
[2] Maximum permissible point gripping error according to ISO 10360-2
[3] Maximum permissible error of scanning point gripping according to ISO 10360-4 standard for SP25M / SP80 / REVO probes 

 

Options
  • Multi-wire cables
  • Models and sizes:
    COORD3 MCT STARLIGHT CMMs are available with the following measuring strokes (Y.Z mm):
    20.20/25.18/25.20/30.20/30.25
request a visit from one of our agents
We care about your data! Find out how we treat them in our privacy policy
measuring machines
coord3
Since 1973 we have been designing, building and distributing coordinate measuring machines (CMMs) and innovative solutions for dimensional control, surface reconstruction and reverse engineering.
COORD3 measuring machines and software are used by small, medium and large companies all over the world to certify and improve the quality of their products. COORD3 boasts a range of measuring machines that includes over 35 automatic and manual models, from cost-effective countertop CMMs for the inspection of small parts to some of the largest Gantry CMMs ever produced.
COORD CMMs are on active duty in the aerospace, defense and heavy industry sectors and make us proud, every day, of our work.
coord3

Strada statale 25, 3 10050 Bruzolo (To)

+390119635511

Perceptron North America
47827 Halyard Drive Plymouth, MI 48170 – U.S.A. Tel: +1 734 414 6100 [email protected]
Perceptron China

Perceptron Trading (Shanghai) Co., Ltd
Room 1005, Building 22
No.368 Zhangjiang Road, Pilot Free Trade Zone
Shanghai 201203 – China
Tel: +86 21 3393-2262
[email protected]

Perceptron Asia
Perceptron Non-Contact Metrology Solutions Pvt Ltd
No. 461-A, Shakti Khand – 4,
Indirapuram, Ghaziabad – 201014, India.
Phone: +91 120 4169746
Perceptron United Kingdom

Perceptron Metrology UK Ltd.
Fort Dunlop, Fort Parkway
Birmingham B24 9FE, UK
Tel: +44 121 6297794
[email protected]

Perceptron EMEA

Wamslerstraße, 2-4
D-81829 Munchen
Germany
Tel: + 49 89 960 980
[email protected]

  • coord3

    Strada statale 25, 3 10050 Bruzolo (To)

    +390119635511

  • Perceptron North America
    47827 Halyard Drive Plymouth, MI 48170 – U.S.A. Tel: +1 734 414 6100 [email protected]
  • Perceptron China

    Perceptron Trading (Shanghai) Co., Ltd
    Room 1005, Building 22
    No.368 Zhangjiang Road, Pilot Free Trade Zone
    Shanghai 201203 – China
    Tel: +86 21 3393-2262
    [email protected]

  • Perceptron Asia
    Perceptron Non-Contact Metrology Solutions Pvt Ltd
    No. 461-A, Shakti Khand – 4,
    Indirapuram, Ghaziabad – 201014, India.
    Phone: +91 120 4169746
  • Perceptron United Kingdom

    Perceptron Metrology UK Ltd.
    Fort Dunlop, Fort Parkway
    Birmingham B24 9FE, UK
    Tel: +44 121 6297794
    [email protected]

  • Perceptron EMEA

    Wamslerstraße, 2-4
    D-81829 Munchen
    Germany
    Tel: + 49 89 960 980
    [email protected]

Strada Statale 25, n°3 – 10050 – Bruzolo (To) – Italy

TECHNICAL ASSISTANCE
[email protected] 

COMMERCIAL SUPPORT
[email protected] 

ADMINISTRATION
[email protected]

PURCHASING OFFICE
[email protected] 

© 2021 COORD 3 S.R.L. | Strada Statale 25, n°3 – 10050 Bruzolo (To) - Italy | REA C.C.I.A.A. N. 1201305 Torino - Capitale sociale versato: Euro 50.000,00 | P.IVA\C.F: 11287420019 | SDI C1QQYZR | ISO 9001 Certified | Privacy Policy  | Cookie Policy
Powered by BECAUSE web design marketing & SEO