cmm gantry | mct plus

• Wide distance between bearings for optimum mechanical stability
• X and Y axes with rack and pinion drive system to ensure an efficient motion of the main axes
• X beams with large transversal section in stabilised steel, equipped with pillar support system to allow for linear expansion without risking stress or distortion
• Measuring system with high-resolution linear transducers (0.1 μm) and with “Dual Reader” and “Dual Drive” systems on the longitudinal X-axis
• Automatic, multi-sensor system for compensating errors due to the thermal elongation of structural elements

• Nominal temperature: 20 °C
• Metrological temperature range: 18 - 22 °C
• Maximum hourly gradient: 0.5 °C/h
• Maximum daily gradient: 2 °C/24h
• Maximum volume gradient: 0.5 °C/m
• Operating temperature: 15 ÷ 35 °C
• Operating relative humidity: 40 ÷ 80% (non-condensing)
• Allowed vibrations:
  30 mm/s² tra 1 e 10 Hz
  15 mm/s² tra 10 e 20 Hz
  50 mm/s² tra 20 e 100 Hz

• Minimum air supply: 5 bar
• Air consumption: 100 Nl/min
• Power supply voltage: 230 V 50 Hz or 110 V 60 Hz (± 2% single-phase)
• Maximum power consumption: 10 A 1200 W

All Coord3 CMM products are factory-tested for accuracy according to the UNI EN ISO 10360 - 2 standard

Models and sizes COORD
PLUS CMMs are available with the following measuring strokes (Y.Z mm):
20.20 / 25.18 / 25.20 / 30.20 / 30.25