cmm gantry | mct plus

Large-scale cmm designed for industrial workshops

CMM gantry| mct plus

MCT PLUS is a range of large-scale gantry CMMs designed for industrial measuring applications.

Its unique structure incorporates the “Dual Drive” and the “Dual Read” system on the beams to limit structural distortion during motion while ensuring excellent metrological performance levels.

GANTRY MCT PLUS systems are particularly suitable for inspections of large components, such as marine engines and transmissions, aeronautical structures, rotors and components for nuclear and thermal power plants, as well as components of wind turbines.

mct plus

General features
Features and benefits
  • Wide distance between bearings for optimum mechanical stability
  • X and Y axes with rack and pinion drive system to ensure an efficient motion of the main axes
  • X beams with large transversal section in stabilised steel, equipped with pillar support system to allow for linear expansion without risking stress or distortion
  • Measuring system with high-resolution linear transducers (0.1 μm) and with “Dual Reader” and “Dual Drivesystems on the longitudinal X-axis
  • Automatic, multi-sensor system for compensating errors due to the thermal elongation of structural elements
Environment
  • Nominal temperature: 20 °C
  • Metrological temperature range: 18 – 22 °C
  • Maximum hourly gradient: 0.5 °C/h
  • Maximum daily gradient: 2 °C/24h
  • Maximum volume gradient: 0.5 °C/m
  • Operating temperature: 15 ÷ 35 °C
  • Operating relative humidity: 40 ÷ 80% (non-condensing)
  • Allowed vibrations:
    30 mm/s2 tra 1 e 10 Hz
    15 mm/s2 tra 10 e 20 Hz
    50 mm/s2 tra 20 e 100 Hz
Supplies
  • Minimum air supply: 5 bar
  • Air consumption: 100 Nl/min
  • Power supply voltage: 230 V 50 Hz or 110 V 60 Hz (± 2% single-phase)
  • Maximum power consumption: 10 A 1200 W
Performance data

All Coord3 CMM products are factory-tested for accuracy according to the UNI EN ISO 10360 – 2 standard

Options

Models and sizes COORD
PLUS CMMs are available with the following measuring strokes (Y.Z mm):
20.20 / 25.18 / 25.20 / 30.20 / 30.25

request a visit from one of our agents
We care about your data! Find out how we treat them in our privacy policy
measuring machines
coord3
Since 1973 we have been designing, building and distributing coordinate measuring machines (CMMs) and innovative solutions for dimensional control, surface reconstruction and reverse engineering.
COORD3 measuring machines and software are used by small, medium and large companies all over the world to certify and improve the quality of their products. COORD3 boasts a range of measuring machines that includes over 35 automatic and manual models, from cost-effective countertop CMMs for the inspection of small parts to some of the largest Gantry CMMs ever produced.
COORD CMMs are on active duty in the aerospace, defense and heavy industry sectors and make us proud, every day, of our work.

Strada Statale 25, n°3 – 10050 – Bruzolo (To) – Italy

TECHNICAL ASSISTANCE
[email protected] 

COMMERCIAL SUPPORT
[email protected] 

ADMINISTRATION
[email protected]

PURCHASING OFFICE
[email protected] 

© 2021 COORD 3 S.R.L. | Strada Statale 25, n°3 – 10050 Bruzolo (To) - Italy | REA C.C.I.A.A. N. 1201305 Torino - Capitale sociale versato: Euro 50.000,00 | P.IVA\C.F: 11287420019 | SDI C1QQYZR | ISO 9001 Certified | Privacy Policy  | Cookie Policy
Powered by BECAUSE web design marketing & SEO