cmm horizontal | jupiter

Horizontal arm measuring system with longitudinal X guideway fixed to the ground ("Runway" architecture) with a shrouded moving arm.

DISCOVER MORE

CMM horizontal | jupiter

The Jupiter is a reliable high-performance CMM for direct use in manufacturing developed specifically for body and subassembly inspection applications.

The JUPITER CMM is track-designed and is available in single- or double-arm configurations. It is fully encapsulated to provide thermal insulation from environmental changes and includes protection from contamination from the shop floor.

The open recessed structure, walkable guards protecting X-slide, and fully fairing structure ensure maximum accessibility to the measuring area and simplify loading/unloading operations, as well as enabling use directly in production areas.

High dynamics and superior precision distinguish this CMM, which can be installed flush with the plant floor and is equipped with floor guide liners as standard.

Air bearings for both the Y and Z axes are the key elements for a high-performance measurement solution. In the double-arm configuration, the measuring volumes of the two horizontal arms overlap by 100 mm to enable complete measurements of the entire structure.

CMM jupiter

general features

Features and Benefits

Measuring System with Linear Optical Transducers
Motion control through servo motors D.C.
Slideways with air bearings on the Y and Z axes, and recirculating ball bearings on the X axis
Mechanical-type head balancing with safety brake

Environment

Temperature: (20 ± 2) °C
Temperature gradient: 1 °C/hour - 2 °C/day - 0.5 °C/m
Acceptable vibrations:
30 mm/sec2 between 1 and 10 Hz
15 mm/sec2 between 10 and 20 Hz
50 mm/sec2 between 20 and 100 Hz

Feeds

Minimum supply pressure: 0.55 MPa
Air consumption: 150 Nl/min (23 l/min at 0.55 MPa)
Supply voltage: 230 V 50 Hz
Power Consumption: 10 A 1400 W

Performance

Each COORD3 CMM is tested according to UNI EN ISO 10360-2 standards.

Options

Cast iron or granite countertop
Linear thermal compensation
Models and dimensions
JUPITER COORD3 CMMs are available with the following measuring strokes (Y.Z mm):
14.20 / 14.25 / 14.30
16.20 / 16.25 / 16.30

request a visit from one of our agents

Name *

Name

Last name

Email *

Phone *

Company *

Company headquarters

Can we send you other communications related to news, promotions and trade shows?

Yes, send me other communications

Do you consent to the processing of your data? *

I consent to the processing of my personal data in accordance with the GDPR

We care about your data! Find out how we handle it in our privacy policy

measuring machines

coord3

We have been designing, building and distributing coordinate measuring machines (CMMs) and innovative solutions for dimensional inspection, surface reconstruction and reverse engineering since 1973.

COORD3 measurement machines and software are used by small, medium and large companies around the world to certify and improve the quality of their products. COORD3 boasts a range of CMMs that includes more than 35 automatic and manual models, from the inexpensive benchtop CMM for inspecting small parts to some of the largest Gantry CMMs ever produced.

COORD3 CMMs are in active service in aerospace, defense and heavy industry and make us proud, every day, of our work.

Strada Statale 25, No. 3 - 10050 - Bruzolo (TO) - Italy

TELEPHONE
+39 011 963 5511

TECHNICAL ASSISTANCE
service@coord3.com

SALES
info@coord3.com

ADMINISTRATION
finance@coord3.com

PURCHASING
acquisti@coord3.com