cmm BRIDGE | benchmark

• Ultra-rigid platform in advanced alloy

• Rapid thermal diffusion  through advanced alloy CMM frame when temperatures change

• FEA design provides optimum moment of inertia and stiffness, allowing high accelerations
•  One-piece granite  base plate with M8 threaded table inserts with wide grid pattern
• Rigid air bearings
• Pneumatic Z-axis counterbalance
•  0.1-micron resolution measuring scales with dynamic signal processing
• Fully digital motion control with probe path blending for optimized CMM performance
• Zero hysteresis friction drives to all axes
• Passive vibration damping system to isolate external vibrations
• Free access to the CMM measuring area
• Maximum positioning speed: 500 mm/sec
• Maximum acceleration: 1500 mm/sec²

• Nominal temperature: 20 °C
• Metrological temperature range: metrologica: 18 - 22 °C
• Temperature gradient: 0,5 °C/hour - 2 °C/day
• Operating temperature range: 15 - 35°C
• Relative humidity: 40 - 80%  (non-condensing)
• Acceptable vibrations: 30 mm/sec² 1-10 Hz | 15mm/sec² 10-20 Hz | 50 mm/ sec² 20-100 Hz

• Minimum air supply: 5 bar
• Air consumption: 90 Nl/min (3 cfm)
• Power supply voltage:  230 V 50 Hz o 110 V 60 Hz
• Maximum power consumption: 10 A, 1200 W

All COORD3 CMM products are factory-tested for accuracy according to the UNI EN ISO 10360 - 2 standard

Performance data are only valid if the following specifications are met:
- PH10T/M/PH20-TP20/TP200: SF Module, Tip diameter Ø 4 mm x Stylus length 10 mm
- L = measuring length in mm
- Ambient temperature Range:
T: 18 ÷ 22 °C; Max. Gradients 0,5 °K/h - 2,0 °K/24h - 0,5 °K/m

^[1] Maximum permissible Error for size measurements according ISO 10360 2:2009
^[2] Maximum limit for repeatability range according ISO 10360 2:2009

• Optional CMM touch station for enhanced ergonomics
• Dynamic wireless thermal compensation of machine and part
• Pneumatic vibration isolation system
• Air dryer
• Modular part fixture kits
• CMM modular enclosure
• Manual Benchmark CNC upgrade kit
• Models and sizes
  COORD3 BENCHMARK CMMs are available with the following measuring strokes (X.Y.Z mm):
  6.5.4