cmm benchmark
particolare benchmark 1

Unique half-gantry design for greater rigidity and lower inertial mass

Table with wide access area for easy loading operations

particolare benchmark 3

Optimized dimensions

  • particolare benchmark 1

    Unique half-gantry design for greater rigidity and lower inertial mass

  • Table with wide access area for easy loading operations

  • particolare benchmark 3

    Optimized dimensions

cmm BRIDGE | benchmark

Budget priced yet high-performance cmm for high-precision inspection of small – and medium – sized parts.

CMM bridge | benchmark

The open structure of the BENCHMARK solution offers an outstanding ergonomic design. Thanks to its compact size, it is perfect for quality control rooms or production environments.

The fully equipped BENCHMARK solution with air bearings ensures an accuracy of 2.5 microns. The standard version is equipped with a Renishaw touch-probe and can be supplied with a motorized probe head for fully automated inspection applications.

The BENCHMARK CMM is particularly suitable for small workshops.

CMM benchmark

General features
The BENCHMARK solution is available in manual or CNC configuration. Manual units can be later upgraded on site to the full CNC version, which offers the opportunity to consider a two-phase investment.
Features and benefits
  • Ultra-rigid platform in advanced alloy
  • Rapid thermal diffusion  through advanced alloy CMM frame when temperatures change
  • FEA design provides optimum moment of inertia and stiffness, allowing high accelerations
  •  One-piece granite  base plate with M8 threaded table inserts with wide grid pattern
  • Rigid air bearings
  • Pneumatic Z-axis counterbalance
  •  0.1-micron resolution measuring scales with dynamic signal processing
  • Fully digital motion control with probe path blending for optimized CMM performance
  • Zero hysteresis friction drives to all axes
  • Passive vibration damping system to isolate external vibrations
  • Free access to the CMM measuring area
  • Maximum positioning speed: 500 mm/sec
  • Maximum acceleration: 1500 mm/sec2
Environment
  • Nominal temperature: 20 °C
  • Metrological temperature range: metrologica: 18 – 22 °C
  • Temperature gradient: 0,5 °C/hour – 2 °C/day
  • Operating temperature range: 15 – 35°C
  • Relative humidity: 40 – 80%  (non-condensing)
  • Acceptable vibrations: 30 mm/sec2 1-10 Hz | 15mm/sec2 10-20 Hz | 50 mm/ sec2 20-100 Hz
Supplies
  • Minimum air supply: 5 bar
  • Air consumption: 90 Nl/min (3 cfm)
  • Power supply voltage:  230 V 50 Hz o 110 V 60 Hz
  • Maximum power consumption: 10 A, 1200 W
Performance data

All COORD3 CMM products are factory-tested for accuracy according to the UNI EN ISO 10360 – 2 standard

Performance data are only valid if the following specifications are met:
– PH10T/M/PH20-TP20/TP200: SF Module, Tip diameter Ø 4 mm x Stylus length 10 mm
– L = measuring length in mm
– Ambient temperature Range:
T: 18 ÷ 22 °C; Max. Gradients 0,5 °K/h – 2,0 °K/24h – 0,5 °K/m

[1] Maximum permissible Error for size measurements according ISO 10360 2:2009
[2] Maximum limit for repeatability range according ISO 10360 2:2009

Options
  • Optional CMM touch station for enhanced ergonomics
  • Dynamic wireless thermal compensation of machine and part
  • Pneumatic vibration isolation system
  • Air dryer
  • Modular part fixture kits
  • CMM modular enclosure
  • Manual Benchmark CNC upgrade kit
  • Models and sizes
    COORD3 BENCHMARK CMMs are available with the following measuring strokes (X.Y.Z mm):
    6.5.4
request a visit from one of our agents
We care about your data! Find out how we treat them in our privacy policy
measuring machines
coord3
Since 1973 we have been designing, building and distributing coordinate measuring machines (CMMs) and innovative solutions for dimensional control, surface reconstruction and reverse engineering.
COORD3 measuring machines and software are used by small, medium and large companies all over the world to certify and improve the quality of their products. COORD3 boasts a range of measuring machines that includes over 35 automatic and manual models, from cost-effective countertop CMMs for the inspection of small parts to some of the largest Gantry CMMs ever produced.
COORD CMMs are on active duty in the aerospace, defense and heavy industry sectors and make us proud, every day, of our work.

Strada Statale 25, n°3 – 10050 – Bruzolo (To) – Italy

TECHNICAL ASSISTANCE
[email protected] 

COMMERCIAL SUPPORT
[email protected] 

ADMINISTRATION
[email protected]

PURCHASING OFFICE
[email protected] 

© 2021 COORD 3 S.R.L. | Strada Statale 25, n°3 – 10050 Bruzolo (To) - Italy | REA C.C.I.A.A. N. 1201305 Torino - Capitale sociale versato: Euro 50.000,00 | P.IVA\C.F: 11287420019 | SDI C1QQYZR | ISO 9001 Certified | Privacy Policy  | Cookie Policy
Powered by BECAUSE web design marketing & SEO