cmm ares
particolare ares 1

Friction movement without hysteresis on all axes

cmm ares particolare 2

Table with wide access area for easy loading operations

particolare ares 3

Rigid, air-supported strut with guide protected by bellows

  • particolare ares 1

    Friction movement without hysteresis on all axes

  • cmm ares particolare 2

    Table with wide access area for easy loading operations

  • particolare ares 3

    Rigid, air-supported strut with guide protected by bellows

cmm BRIDGE | ares

High-performance dimensional inspection for a wide range of metrology applications.

CMM bridge | ares

ARES CMMs have a lower overall height compared to most CMM solutions available on the market. They may also be provided with a low profile support stand to reduce the overall height by an additional 100 mm.

This particular features makes ARES especially suitable for inspection laboratories with low ceilings.

ARES CMMs are available in manual or CNC configuration; manual units may be optionally upgraded to a full CNC version at a later date.

Two performance levels are available:

  • ARES: for standard applications.
  • ARES NT: per for higher performance requirements. The ARES NT model has a silicon carbide Z-axis column that increases the overall stiffness of the measuring platform.

CMM ares

General features
CMMs are available with bridge widths of 500 mm and 700 mm, and are perfectly suitable for workshops.
Features and benefits
  • Ultra-rigid alloy CMM frame provides maximum stiffness for scanning applications
  • Rapid thermal diffusion structure when environment conditions change
  • FEA-designed bridge beam extrusion to optimize the moment of inertia and ensure minimum deflection when operating at high accelerations
  • M8 threaded table fitted in a wide grid pattern
  • Rigid air bearings for wide bearing spread ratios
  • Pneumatic Z-axis counterbalance
  • Free-floating, 0.1-micron resolution measuring scales with incorporated dynamic signal processing
  • Fully digital motion control with probe path blending for optimized performance
  • Zero hysteresis friction drives on all axes
  • Passive vibration damping system to isolate external vibrations
  • Free access to the CMM measuring area from all sides
  • Maximum positioning speed: 517 mm/sec
  • Maximum acceleration: 1730 mm/sec2
Ares NT
  • Silicon carbide Z-axis column  for greater rigidity
  • Optional Renishaw TONiC 0.1-micron resolution measuring scales
  • Dynamic wireless thermal compensation system including part temperature sensor.
Environment
  • Nominal temperature: 20 °C
  • Metrological temperature range: metrologica: 18 - 22 °C
  • Temperature gradient: 0,5 °C/hour - 2 °C/day
  • Operating temperature range: 15 - 35°C
  • Relative humidity: 40 - 80%  (non-condensing)
  • Acceptable vibrations: 30 mm/sec2 1-10 Hz | 15mm/sec2 10-20 Hz | 50 mm/ sec2 20-100 Hz
Supplies
  • Minimum air supply: 5 bar
  • Air consumption: 100 Nl/min
  • Power supply voltage:  230 V 50 Hz o 110 V 60 Hz (+/- 2% single-phase)
  • Maximum power consumption: 10 A 1200 W (1600 W the largest models)
Performance data

All Coord3 CMM products are factory-tested for accuracy according to the UNI EN ISO 10360 - 2 standard

ARES 05.05 / 07.05

Performance data are only valid if the following specifications are met:
- PH10T/M/PH20-TP20/TP-200: Tip diameter Ø 4mm x Stylus length 10mm
- PH6M/PH10M-SP25M: SM1, stylus Ø 5mm x 50mm
- L= measuring length in mm
- CMM equipped with Multisensor temperature compensation system (Optional)

- Ambient temperature Range:
T1 : 18÷22 °C; Max. Gradients: 0,5 °C/h - 2,0 °C/24h - 0,5°C/m
T2: 16÷26°C; Max. Gradients:1,0 °C/h - 5,0 °C/24h - 1,0 °C/m

[1] Maximum Permissible Error of indication for size measurement accordind ISO 10360-2
[2] Maximum Permissible Probing Error according ISO 10360-2
[3] Maximum Permissible Scanning Probing Error according ISO 10360-4, applicable to the SP25M probes only

 

ARES NT 05.05 / 07.05 / 07.07

Performance data are only valid if the following specifications are met:
- PH10T/M/PH20-TP20/TP200: Tip diameter Ø 4 mm x Stylus length 10 mm
- PH6M/PH10M-SP25: SM1, Stylus Ø 5 mm x 50 mm
- L = measuring length in mm
- CMM equipped with Multisensor temperature compensation system (Optional)
- Ambient temperature Range:
T1: 18 ÷ 22 °C; Max. Gradients: 0,5 °C/h - 2,0 °C/24h - 0,5 °C/m
T2: 16 ÷ 26°C; Max. Gradients: 1,0 °C/h - 5,0 °C/24h - 1,0 °C/m
[1] Maximum Permissible Error of indication for size measurement accordind ISO 10360-2
[2]  Maximum Permissible Probing Error according ISO 10360-2
[3] Maximum Permissible Scanning Probing Error according ISO 10360-4, applicable to the SP25M probes only

 

Options
  • Laser scanning  sensor
  • Dynamic wireless thermal compensation  of the machine and its components
  • Pneumatic vibration isolation system
  • Modular part fixing kits
  • Models and sizes
    COORD3 ARES CMMs are available with the following measuring strokes (X.Y.Z mm):
    7.5.5
    7.7.5 / 10.7.5 / 12.7.5
    7.7.7 / 10.7.7 / 12.7.7
request a visit from one of our agents

We care about your data! Find out how we treat them in our privacy policy

measuring machines
coord3
Since 1973 we have been designing, building and distributing coordinate measuring machines (CMMs) and innovative solutions for dimensional control, surface reconstruction and reverse engineering.
COORD3 measuring machines and software are used by small, medium and large companies all over the world to certify and improve the quality of their products. COORD3 boasts a range of measuring machines that includes over 35 automatic and manual models, from cost-effective countertop CMMs for the inspection of small parts to some of the largest Gantry CMMs ever produced.
COORD CMMs are on active duty in the aerospace, defense and heavy industry sectors and make us proud, every day, of our work.
coord3

Strada statale 25, 3 10050 Bruzolo (To)

+390119635511

Perceptron North America
47827 Halyard Drive Plymouth, MI 48170 - U.S.A. Tel: +1 734 414 6100 [email protected]
Perceptron China

Perceptron Trading (Shanghai) Co., Ltd
Room 1005, Building 22
No.368 Zhangjiang Road, Pilot Free Trade Zone
Shanghai 201203 - China
Tel: +86 21 3393-2262
[email protected]

Perceptron Asia
Perceptron Non-Contact Metrology Solutions Pvt Ltd
No. 461-A, Shakti Khand – 4,
Indirapuram, Ghaziabad – 201014, India.
Phone: +91 120 4169746
Perceptron United Kingdom

Perceptron Metrology UK Ltd.
Fort Dunlop, Fort Parkway
Birmingham B24 9FE, UK
Tel: +44 121 6297794
[email protected]

Perceptron EMEA

Wamslerstraße, 2-4
D-81829 Munchen
Germany
Tel: + 49 89 960 980
[email protected]

  • coord3

    Strada statale 25, 3 10050 Bruzolo (To)

    +390119635511

  • Perceptron North America
    47827 Halyard Drive Plymouth, MI 48170 - U.S.A. Tel: +1 734 414 6100 [email protected]
  • Perceptron China

    Perceptron Trading (Shanghai) Co., Ltd
    Room 1005, Building 22
    No.368 Zhangjiang Road, Pilot Free Trade Zone
    Shanghai 201203 - China
    Tel: +86 21 3393-2262
    [email protected]

  • Perceptron Asia
    Perceptron Non-Contact Metrology Solutions Pvt Ltd
    No. 461-A, Shakti Khand – 4,
    Indirapuram, Ghaziabad – 201014, India.
    Phone: +91 120 4169746
  • Perceptron United Kingdom

    Perceptron Metrology UK Ltd.
    Fort Dunlop, Fort Parkway
    Birmingham B24 9FE, UK
    Tel: +44 121 6297794
    [email protected]

  • Perceptron EMEA

    Wamslerstraße, 2-4
    D-81829 Munchen
    Germany
    Tel: + 49 89 960 980
    [email protected]

Strada Statale 25, n°3 - 10050 - Bruzolo (To) - Italy

TECHNICAL ASSISTANCE
[email protected] 

COMMERCIAL SUPPORT
[email protected] 

ADMINISTRATION
[email protected]

PURCHASING OFFICE
[email protected] 

© 2021 COORD 3 S.R.L. | Strada Statale 25, n°3 – 10050 Bruzolo (To) - Italy | REA C.C.I.A.A. N. 1201305 Torino - Capitale sociale versato: Euro 50.000,00 | P.IVA\C.F: 11287420019 | SDI C1QQYZR | ISO 9001 Certified | Privacy Policy  | Cookie Policy
Powered by BECAUSE web design marketing & SEO