Swan L Horizontal Arm CMM

horizontal-armHorizontal arm CMMs are the ideal solution to measure thin walled components, such as sheet metal car bodies, car panels, car doors, vehicle glass, dashboards and for the inspection of mechanical parts such as engine blocks and transmission castings, and aeronautical and automotive components.

Horizontal arm systems are available both in single and dual arm versions. The table support system is so designed to minimize the requirement for a machine foundation system. Machines can be equipped with touch, scanning or optical sensors.

The COORD3 horizontal arm CMM range includes:

  • Swan Runway Model Horizontal arm CMM with longitudinal X guideway fixed to the rail base for shop or lab usage
  • Swan Console Model Horizontal arm CMM with longitudinal X guideway fixed to the side of the CMM table for shop or lab usage
  • Jupiter Runway Model Horizontal CMM for use in direct production to pace manufacturing. The machine is fully encapsulated to provide thermal isolation from environmental changes and includes protection from shop floor contamination.
Features & Benefits
  • Table or rail models in single or twin arm configuration
  • Manual and DCC models with optional disengageable drives available
  • Granite or cast iron surface plate
  • Steel X guideway
  • Rugged machine construction for reliable operation in manufacturing environments
  • 0.1 micron resolution measuring scales incorporating dynamic signal processing
  • Highest accuracy in industry
  • Precision roller bearings on X axis
  • Rigid air bearings to Y and Z axes with wide bearing spread ratios and low air consumption
  • Walk-on X axis covers for optimal safety
  • Open access to CMM measuring area from all sides
  • Suitable for a shop floor environment
  • Maximum Positioning Speed 520mm/sec (Jupiter model 580mm/sec)
  • Maximum Acceleration 850mm/sec² (Jupiter model 1500mm/sec²)
Model Sizes

X axis strokes: 2000 | 3000| 4000 | 5000 | 6000 | 8000

Y axis strokes*:1200 | 1500 | (HS model 1400 | 1600)

Z axis strokes:1500 | 1800 | 2000 | (HS model 2000 | 2500 | 3000)

*Per arm measuring stroke. Dual machine arms overlap by 100mm

MPEP  from 12 microns

MPEE  from 12 + 22L/1000 ≤ 45



  • Nominal Temperature 20 °C
  • Allowable Temperature Range: 18 – 22 °C (Extended Range 16 – 26 °C)
  • Temperature Gradient:  0.5° C/hour – 2° C/day – 0.5° C/meter (Extended Range 5° C/day – 1.0° C/meter)
  • Operating Temperature Range: 15 – 35 °C
  • Relative Humidity 40 – 80% (non condensating)
  • Acceptable Vibrations: 30mm/ sec2 1-10Hz | 15mm/ sec2 10-20Hz | 50mm/ sec² 20-100Hz


  • Minimum Air Supply 5.5 Bar -80PSI
  • Air Consumption 110Nl/min (HS model 150Nl/min)
  • Power Supply Voltage 230v 50Hz or 110v 60Hz (+/- 2% single phase)
  • Maximum Power Consumption 10A 1400W

Performance Data

  • Coord3 CMM products are evaluated for accuracy using the ISO10360 standard.
  • Disegageable drives on DCC models allowing manual operation
  • Protection bellows
  • Table threaded holes or T slots
  • Laser line scanning system
  • Renishaw PHS infinite position probe head
Datasheet Download

SWAN Console Horizontal ARM CMM Technical Data Sheet

Your Name (required)

Company (required)

Your Email (required)

Your Phone Number (required)